If using on an envelope, close and seal your envelope flap. Then, moisten your seal to ensure that the wax will not stick to your stamper.
Light the wick of the sealing wax and hold the stick about 7.62-to-12.7 cm (3-to-5 inches) over the paper or project at a 45-degree angle, allowing the wax to drop on to the envelope; adjust the angle as needed to control the flow. When you have enough wax on the surface of the envelope, blow out the flame and rest the stick on a hard surface.
Press your seal into the hot wax and wait until the wax is almost dry before removing your seal and revealing a beautiful wax imprint.
